Garage Door Opener Repair

Quick

Response

5 star

Rated

best offer

Guaranteed

Contact Us

First Name

Last Name

Phone Number

Email Address

Message

By submitting this form and signing up for texts, you consent to receive text messages from Century Garage Door Repair Service at the number provided, including messages sent by the auto dialer. Consent is not a condition of purchase. Msg & data rates may apply. Msg frequency varies. Unsubscribe at any time by replying STOP to 833-435-4540 or clicking the unsubscribe link (where available), and no further messages will be sent. Reply HELP for help. See Privacy Policy & Terms.

A garage door opener that stops working correctly disrupts daily routines, compromises access, and can indicate a developing problem that will worsen without attention. Century Garage Door provides fast, professional opener repair for residential and commercial properties across all major brands and operator configurations. Our technicians are available 24/7, diagnose accurately before replacing any parts, and restore full opener function before every job is closed out.

Our Services:

what your neighbors are saying about us

I had an excellent experience with Century Garage Door Service! From start to finish, the service was professional, prompt, and reliable. The technician, Michael, was outstanding...

Michael and Mit were both great. Both were friendly and informative. They addressed my concerns quickly and also provided a list of need to do versus recommended to do so I can plan...

I can’t say enough about the knowledge, skill and professionalism of both Michael and MIT. They arrived on time and explained the options in repairing my garage door. They completed the...

Michael was awesome! He fixed everything, gave great information and context - so now I have two working garage doors and I don't have to yell at the kids to be careful with them anymore! Thanks...

Roy was very helpful and did such a great job fixing my garage door. He was reliable and fast, but also very knowledgeable and willing to work with me on my schedule. Highly recommend this...

Signs Your Garage Door Opener Needs Repair

Most opener failures give clear warning signs before they become a complete breakdown. Addressing these signs early results in a faster, less involved repair and prevents the problem from causing secondary damage to the door system.

Signs your garage door opener needs professional attention:

The opener runs through its full cycle but the door does not move or travels only a few inches before stalling.
The door reverses before fully closing without an obvious obstruction in the sensor path.
The opener responds intermittently — working on some commands but not others — suggesting a signal, receiver, or control board issue.
All access methods stop working simultaneously, including the remote, keypad, and wall switch, pointing to a power or control board failure rather than an individual device.
The motor runs continuously after the door has finished moving, indicating a limit switch that needs recalibration.
Unusual sounds such as grinding, clicking, or straining are present during operation that were not there before.
The remote works but the wall switch does not, or vice versa, isolating the fault to a specific component in the control circuit.

If your opener is showing any of these signs, call Century Garage Door for a same-day diagnosis before the issue progresses further.

Common Opener Problems We Fix

Opener failures are caused by a consistent set of mechanical and electrical issues that Century Garage Door technicians are trained to identify and resolve accurately on the first visit. We test the full system before replacing any component so the repair addresses the actual cause rather than the most visible symptom.

Common garage door opener problems we resolve include:

Motor failure where the motor unit has stopped producing output due to burned windings, thermal overload, or mechanical seizure from extended use without adequate maintenance.
Stripped or worn gears inside the motor housing that allow the motor to run without transferring motion to the drive mechanism — one of the most common causes of an opener that sounds operational but fails to move the door.
Control board failure that produces erratic behavior, unresponsive controls, or complete system shutdown — often triggered by power surges, voltage irregularities, or age-related component degradation.
Limit switch miscalibration causing the door to reverse before fully closing, stop short of the fully open position, or run past the intended travel endpoint.
Drive mechanism wear on chain, belt, and screw drive systems where the primary power transfer component has stretched, frayed, or worn to the point of slipping under load.
Trolley and carriage failure where the component connecting the opener drive to the door has cracked, disconnected, or seized and is preventing the drive’s motion from reaching the door.
Remote and keypad communication failures caused by dead batteries, lost programming, signal interference, or a degraded receiver module within the opener unit.

Garage Door Opener & Safety Sensor Repair Services

Safety sensors are a critical part of every modern garage door opener system, and sensor problems are one of the most frequent causes of opener service calls. Century Garage Door repairs both the opener unit and its connected safety sensor system as part of a complete service offering rather than treating them as separate jobs.

Opener unit repair covers all mechanical and electrical components within the motor housing — motor replacement, gear set repair, control board diagnosis and replacement, drive mechanism service, and limit switch recalibration. Century Garage Door carries components for most major residential and light commercial opener brands on every service vehicle and completes the majority of unit-level repairs during the first visit. We test the full system after every repair to confirm the opener is cycling correctly and all force and limit settings are within safe operating parameters.
Safety sensor repair addresses the photoelectric sensors mounted at the base of each side of the door track that are required to reverse the door when an obstruction is detected. Sensor problems are frequently the cause of a door that refuses to close, reverses unexpectedly, or displays blinking indicator lights on the opener unit. Century Garage Door diagnoses sensor issues by testing alignment, wiring continuity, lens condition, and receiver function — identifying whether the problem is a misalignment, a wiring fault, a contaminated lens, or a failed sensor unit — before any replacement is performed.

Emergency Opener Repair

A garage door opener failure that leaves the door stuck open, prevents the door from closing, or locks a vehicle inside the garage is a situation that needs immediate attention. Century Garage Door provides 24/7 emergency opener repair for residential and commercial customers so a failed system does not force you to leave your home unsecured or your facility unable to operate overnight.

Our technicians are dispatched quickly with components for the most common emergency opener failures stocked on service vehicles. Whether the issue is a failed control board, a broken gear set, a sensor failure preventing the door from closing, or a complete motor shutdown, we arrive prepared to diagnose and repair the full system in a single visit. Call us any time and a real technician will be reachable immediately.

Why Choose Century Garage Door

Homeowners and businesses choose Century Garage Door for opener repair because we diagnose the root cause before replacing any parts. An accurate diagnosis means the repair is lasting, the correct component is addressed, and the homeowner is never charged for parts that were not the source of the problem.

Reasons to choose Century Garage Door:

Available 24 hours a day, 7 days a week for emergency and scheduled opener repair.
Same-day response for most opener repair calls to restore access quickly.
Systematic diagnostic process that identifies root causes accurately before any parts are replaced.
Opener unit and safety sensor repair handled as a complete service on every visit.
Components for most major residential and commercial opener brands stocked on every service vehicle.
Honest repair versus replacement assessment so you are never oversold on parts or a new unit.
Full safety inspection and operational test included with every opener repair at no additional charge.
Transparent, upfront pricing with a free estimate and no hidden fees before any work begins.
Consistent workmanship standards backed by a professional guarantee on every repair.

Call now for fast garage door opener repair. Get a free estimate from our team today.

Frequently Asked Questions

Why does my garage door opener run but the door does not move?

This is most commonly caused by a stripped or worn gear set inside the motor housing, a disconnected or failed trolley carriage, or a broken torsion spring that has removed the door’s counterbalance. The motor is operating but the mechanical connection between the drive and the door has failed. Stop using the opener and call Century Garage Door for same-day diagnosis and repair.

Why does my garage door reverse before it fully closes?

The two most common causes are misaligned or malfunctioning safety sensors and an incorrectly calibrated limit switch. Check that both sensor indicator lights are solid and steady and that nothing is blocking the sensor path at the base of the door tracks. If the sensors appear clear and aligned, the limit switch setting likely requires professional recalibration. Century Garage Door can diagnose and resolve both causes during a same-day service visit.

Why did all of my garage door controls stop working at the same time?

When all access methods — remote, keypad, and wall switch — fail simultaneously, the fault is almost always in the power supply or the opener’s control board rather than the individual devices. Check the outlet and circuit breaker first. If power is confirmed and the opener still does not respond, the control board is the likely cause and requires professional diagnosis.

How do I know if my opener needs repair or full replacement?

If the opener is under ten years old and the failure is isolated to a specific component such as a gear set, control board, or sensor, repair is typically the right choice. If the opener has experienced repeated failures, is no longer supported by the manufacturer, or lacks current safety features, replacement may be the more practical long-term decision. Century Garage Door will provide an honest comparison of repair versus replacement costs and recommendations before any work begins.

Can you repair all garage door opener brands?

Yes. Century Garage Door services all major residential and commercial opener brands including LiftMaster, Chamberlain, Genie, Craftsman, and others. We carry components for most current and recent model openers on our service vehicles and can source parts for older models in most cases.

Garage Door Repair & Maintenance

New Doors & Installations

Openers, Motors & Smart Tech

Weatherproofing & Seals

Commercial Services